Models
>
FRA106HT20
FRA106HT20 Frigidaire Air Conditioner - Overview
Sections of the FRA106HT20
[Viewing 3 of 3]Manuals & Care Guides for FRA106HT20
Click to downloadInstall
Installation Instructions
(5.90MB)
Manual
Owner's Manuals
(6.76MB)
Wiring
Wiring Diagram
(0.2MB)
Keep searches simple, eg. "belt" or "pump".
Electronic Control Board Assembly
PartSelect #: PS2359312
Manufacturer #: 5304471197
This electronic control board assembly is for room air conditioners.
Electronic control board assembly manages the operations of the room air conditioner like temperature and fan speed. The assembl...
$117.45
In Stock
Questions And Answers for FRA106HT20
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Power doesn't turn off. Compressor continues to run when control switch is off.
1. Most importantly, unplug the a/c unit from the electric wall socket for safety.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover ... Read more of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
2. Remove the filter at the front of the unit.
3. Remove the 2 screws located behind the filter.
4. Open the front cover of the unit using flat screw driver.
5. Unscrew the attached Old electronic control board from the front cover ... Read more of a/c to detach.
6. Unplug the Old electronic control board from the a/c unit.
7. Plug in the New electronic control board to the a/c unit.
8. Plug the a/c to the electric wall socket to test is the new electronic control board works before closing up everything.
Read less
Parts Used:
-
Mary Grace from WOODSIDE, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The display was flashing 0.5 off and on then it wouldn’t power up
I took the face of the air condition. Off removed the circuit board, cleaned everything down with the alcohol pad. Put it all back together. It seems to work fine. I’m thinking maybe from a heavy rain storm. Rain got inside there.. Nevertheless, I still have the board I purchased I guess I’ll keep it as a spare. Thanks again
Parts Used:
-
scott from ISLAND PARK, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!