This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If ...
This door latch keeps the microwave door closed during operation. The latch is approximately 7 inches long and has 2 hooks to ensure that the door closes properly. The hooks also contact the door swit...
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the co...
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch...
Ask our experts a question about this model and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
January 31, 2020
How to take door off to get at the wiring harness on left side
For model number FPBM3077RFA
Hi Dennis. Make sure your appliance has no power. Open your door and remove the top screws on the front vent. You can then use a putty knife to pry off the vent. The door should now just lift off. Thank you for your question and good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lelia
November 29, 2019
What is error 11?
For model number FPBM3077RFA
Hello Lelia, thank you for writing. First you can try resetting the microwave to clear the error by unplugging it for ten minutes, then plugging it back in. If the error is not cleared, then you likely have a faulty Sensor, part number PS3491315 for your model microwave. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gokaran
October 22, 2023
my microwave is not turning on, no lights, no clock and the fuse is ok and there is electrical power in the outlet, since it's installed, I have used it a couple times and when I went back to use it noticed it was not lighting up, is there anything else I can check?
For model number FPBM3077RFA
Hi Gokaran, thank you for your question! Based on the description that you have provided, we would recommend checking the thermostat, part number PS12071310. We hope that helps!
All of the touch buttons on the left side of the front panel stopped functioning - all buttons to the right of the clock display work, including the start button. The unit still works fine. Any help?
For model number FPBM3077RFA
Hello Scott, Thank you for your inquiry. We have researched your model and recommend changing the control panel and touchpad. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so. Good luck with your repair.
https://www.partselect.com/Microwave+discharge-capacitor+repair.htm
Can you purchase a complete door with wiring harness in it
For model number FPBM3077RFA
Hi Brian,
Thank you for your question. A complete door assembly is available for your microwave. The part number listed under your model number for the door assembly before serial number KG51301536 is PS11700271. The part number listed under your model number for the door assembly after serial number KG51301536 or later is PS11731942. If you would like to place an order for one of them, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have curre
... Read morent running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.
