Models > FMV156DQB

FMV156DQB Frigidaire Microwave - Overview

Get Parts and Repair Help for FMV156DQB

If you know the microwave repair part you need, you can browse the list of all parts on the FMV156DQB, or you can search by name or part description. You can also find your part by where it is located on the FMV156DQB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$17.66

Grease Filter

Sold individually.

$27.87

Relay Switch

$62.79

Glass Cooking Tray

$40.50

Waveguide Cover

$63.02

SUPPORT ASSY

$29.18

Light Bulb - 20W

Sold individually.

$25.38

DAMPER ASSEMBLY

$5.80

SCREW-UNIFIED

$28.68

Turntable Motor

$18.07

Filter

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Timer would run but the microwave won't start

  • Customer: Tim from Chicago IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 39 of 52 people found this instruction helpful
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up. read more

Wave guide cover was cracked. Oven started to spark and make popping noises when in use.

  • Customer: amy from corona CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 21 of 28 people found this instruction helpful
Part arrived in one day. Old part snapped right out and new snapped right in. One minute repair with no more sparking and no need to invest in a new microwave... which is what I thought I was going to have to do. read more

Turntable stoped working

  • Customer: steve from New Bern NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 14 of 16 people found this instruction helpful
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST. read more