Models > FMV156DCA

FMV156DCA Frigidaire Microwave - Overview

Get Parts and Repair Help for FMV156DCA

If you know the microwave repair part you need, you can browse the list of all parts on the FMV156DCA, or you can search by name or part description. You can also find your part by where it is located on the FMV156DCA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.66

Grease Filter

Sold individually.

$27.87

Relay Switch

$97.91

Door Handle

Black in color. Handle only.

$40.50

Waveguide Cover

$62.79

Glass Cooking Tray

$85.80

Vent Grille - Black

$18.07

Filter

$28.68

Turntable Motor

$25.38

DAMPER ASSEMBLY

$63.02

SUPPORT ASSY

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Timer would run but the microwave won't start

  • Customer: Tim from Chicago IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 32 of 38 people found this instruction helpful
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up. read more

Broken Handle

  • Customer: Brent from Bend OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 23 of 34 people found this instruction helpful
Removed the retaining clip that keeps the door on, took the door off. Removed the plastic rim that is clipped into place. Removed old screws holding on handle and replaced. read more

microwave wouldn't turn on but timer worked.

  • Customer: Steve from Moorhead MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 17 of 25 people found this instruction helpful
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and... read more