Models > FMT144G1W1

FMT144G1W1 Frigidaire Microwave - Overview

Get Parts and Repair Help for FMT144G1W1

If you know the microwave repair part you need, you can browse the list of all parts on the FMT144G1W1, or you can search by name or part description. You can also find your part by where it is located on the FMT144G1W1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.


Charcoal Filter

This vent hood filter collects grease particles in the air from cooking. Sold individually.


Microwave Light Bulb

Sold individually.


Air Filter

Sold individually.


Light Receptacle

Bulb sold separately.


Stirrer Fan Motor

This part operates the stirrer fan in the microwave.



Glass Turntable Motor

This motor rotates the microwave glass turntable.


Light Lens

This is the glass that covers the bulb on the undercarriage of the microwave.


Turntable Tray Support Ring with Rollers


High Voltage Diode

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replace Charcoal Filter

  • Customer: Stuart from North Port NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 15 of 25 people found this instruction helpful
Philips head screwdriver to remove 2 screws holding plastic grill above microwave door in place. Old Filter lifts out slide new filter in. It rests on an angle. Re insert Grill (careful that plastic tabs slide into proper slots). Tighten SCrews read more

Microwave door window seal damaged.

  • Customer: Freddie from Roanoke VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The "seal" is a clear plastic sheet that forms the inner most layer of the "window" in the microwave door. If it becomes damaged or doesn't adhere properly, steam and other cooking by-products get inside the door itself. That's what happened in my case. As a result, I had to disassemble the entire door to clean the inside of the glass and other parts. If... read more

Replace the bulb

  • Customer: Gary from McDonough GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 17 people found this instruction helpful
Unscrew the glass lamp cover and replace the bulb. Very simple. The hardest part was to find the bulb. I looked at my local hardware stores but of course they did not have them. This site was great and easy to order. I looked at 3 other sites before finding this one to be the most simplistic to use. read more