Models > FGP325KW0

FGP325KW0 Roper Range - Overview

Get Parts and Repair Help for FGP325KW0

If you know the range repair part you need, you can browse the list of all parts on the FGP325KW0, or you can search by name or part description. You can also find your part by where it is located on the FGP325KW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$49.35

Oven Igniter

This flat style gas oven igniter has ceramic housing and comes with a connector.

$5.25

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$50.63

Door Handle Kit

This handle comes with the 2 screws and 2 push nuts.

$25.54

Door Trim

$2.70

Installation Screw

This screw is sold individually.

$3.96

Rear Leveling Leg

Sold individually.

$23.01

Mounting Clip

Used to hold spark electrode in place.

$7.72

Spray Paint - 12 oz. - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

our oven would not heat up

  • Customer: sharnette from baltimore MD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 30 of 33 people found this instruction helpful
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are v... read more

Oven would not heat.

  • Customer: Nedra from Alsip IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 13 of 15 people found this instruction helpful
Installing the part was really easy. I first turned the gas off, simply remove two screws tht hold the igniter in place. I then remove four screws from the back panel and disconnected the part. The feedback from other users on your site made me realize how easy it was. It took less than thirty minutes. read more

The igniter would turn orange but wouldn't fire up, so the oven wouldn't heat up.

  • Customer: Lisa from Livermore CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 11 of 12 people found this instruction helpful
I just unscrewed the old one out, which was 2 screws and screwed this one in. But the thing that was best of all was how fast the part came in. It literally came the next day. read more