Models > FGP215VW3

FGP215VW3 Roper Range - Overview

Get Parts and Repair Help for FGP215VW3

If you know the range repair part you need, you can browse the list of all parts on the FGP215VW3, or you can search by name or part description. You can also find your part by where it is located on the FGP215VW3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FGP215VW3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.70

Cover Screw

Sold individually.

$2.70

Screw

This screw is sold individually.

$18.07

2 Piece Broiler Pan

The top of this part is now black.

$28.02

Suface Burner Ignition Switch

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$2.70

Screw

This screw is sold individually.

$5.74

Screw - #10 - 32x1/2

Sold Individually.

$4.13

Thermostat Bulb Clip

$18.45

Oven Sides Seal

It is made of black rubber and has a metal hook in each end.

$19.57

Top Burner Spark Igniter

Also known as a spark electrode.

$31.80

Bake or Broil Spark Igniter

Also known as spark electrode. This part helps your burner ignite and produce flame.

Common Symptoms of the FGP215VW3 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ignitor did not spark when turning the know

  • Customer: Richard from Lansing MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 9 people found this instruction helpful
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light... read more

Left rear burner would not ignite

  • Customer: John from Perth Amboy NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 5 of 6 people found this instruction helpful
Removed the burner plates. Lifted up the range top. Removed the knobs. Unbolted the 2 rounded nuts at top of face plate. Removed the 4 screws that hold the face plate in place from behind. Un plugged the old switch and plugged in the new one and bam! The burner worked. Thanks, Super fast shipping! The part was here in less than 36 hours. John, N.J. read more

two burner ignitors would not function on cook stove

  • Customer: Warren from Las Cruces NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 6 people found this instruction helpful
1. ordered two new switches
2. installed switches
3. all ignitors work

Really appreciated the pictures of the parts--made selection very easy. read more