Models > FGMV173KWB

FGMV173KWB Frigidaire Microwave - Overview

Get Parts and Repair Help for FGMV173KWB

If you know the microwave repair part you need, you can browse the list of all parts on the FGMV173KWB, or you can search by name or part description. You can also find your part by where it is located on the FGMV173KWB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$17.66

Grease Filter

Sold individually.

$27.87

Relay Switch

$78.61

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$24.30

Air Filter

Sold individually.

$45.79

BRACKET

$29.18

Light Bulb - 20W

Sold individually.

$5.52

SCREW

$29.64

Door Latch

This black door latch enables the switches to make sure that the door is closed before it operates.

$25.38

Stirrer Fan Cover

$25.38

DAMPER ASSEMBLY

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Timer would run but the microwave won't start

  • Customer: Tim from Chicago IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 39 of 52 people found this instruction helpful
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up. read more

Turntable stoped working

  • Customer: steve from New Bern NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 14 of 16 people found this instruction helpful
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST. read more

microwave wouldn't turn on but timer worked.

  • Customer: Steve from Moorhead MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 28 people found this instruction helpful
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and... read more