Models > FGC355YW0

FGC355YW0 Roper Range - Overview

Get Parts and Repair Help for FGC355YW0

If you know the range repair part you need, you can browse the list of all parts on the FGC355YW0, or you can search by name or part description. You can also find your part by where it is located on the FGC355YW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FGC355YW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$54.80

Flat Style Oven Igniter

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

$27.23

Rocker Switch - Black

This rocker switch can be used for both the oven selector and/or the oven light.

$123.95

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$41.21

KNOB

$14.41

BOWL-DRIP

$137.16

Safety Valve

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

HINGE-DOOR

$215.27

THRMST-OVN

$3.83

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

ignitor glowed but did not ignite

  • Customer: james from long beach NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 12 of 20 people found this instruction helpful
took oven base plate out. diconnected ignitor , put new clips on neutral wire as per instructions, inserted new ignitor, put everything back, worked ok. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

Igniter turned red but oven would not light

  • Customer: Dwayne from Mesquite TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 6 of 12 people found this instruction helpful
Remove broiler pan, disconnect wires from igniter to gas safety valve and connection in back corner of stove, under a metal plate held in with one screw. Remove two screws holding igniter in and take it out. With new igniter, cut neutral wire as per instructions with it, attach electrical clips to the wire ends, install the new igniter with the two screws, p... read more