Models > FGB557CEBD

FGB557CEBD Frigidaire Oven - Overview

Get Parts and Repair Help for FGB557CEBD

If you know the oven repair part you need, you can browse the list of all parts on the FGB557CEBD, or you can search by name or part description. You can also find your part by where it is located on the FGB557CEBD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for FGB557CEBD parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FGB557CEBD [Viewing 6 of 6]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$19.48

Light Bulb Lens

This lens covers the interior oven light bulb.

$14.62

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$25.30

Oven Light Socket

$193.01

Flat Glow Bar Igniter

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

$17.04

Door Switch

$112.29

Outer Oven Door Glass - Black

$31.14

Light Lens Retainer Clip

This retainer secures the light lens to the oven cavity.

$67.12

Flat Style Oven Igniter - Broiler

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

$39.64

BROILER PAN & INSER

$27.25

Door Hinge Receptacle

Sold individually.

Common Symptoms of the FGB557CEBD [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 24 of 30 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

Broiler igniter not glowing

  • Customer: Steven from Silver Spring MD
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 7 of 10 people found this instruction helpful
1) Turn off the gas and disconnect the power

2) Remove oven door. There requires that you remove the two square drive (SD) bolts on the inside, partially close the door and lift it off the hinges.

3) Remove the grills.

4) At the back remove the rear shield (aluminum panel held by 2 SD sheet metal screws.

5) this... read more

Oven Door Light Switches Wrecked by Heat from Oven

  • Customer: Gregory from Croton-on-Hudson NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 2 of 5 people found this instruction helpful
Pull old switches out with pliers and replugged new switches. On main oven, plug casing was melted (wife left broiler on with oven door closed) so had to break apart old casing and individually plug the the wires into new switch and amazingly, it worked! Just gotta keep the door open when broiling............. read more