Models > FGB557CEBA

FGB557CEBA Frigidaire Oven - Overview

Get Parts and Repair Help for FGB557CEBA

If you know the oven repair part you need, you can browse the list of all parts on the FGB557CEBA, or you can search by name or part description. You can also find your part by where it is located on the FGB557CEBA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for FGB557CEBA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FGB557CEBA [Viewing 5 of 5]

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$189.19

Flat Glow Bar Igniter

$16.25

SWITCH

$30.25

Light Lens Retainer Clip

This retainer secures the light lens to the oven cavity.

$5.73

SCREW

$67.12

Flat Style Oven Igniter - Broiler

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

$0.77

FASTENER

$110.09

Outer Oven Door Glass - Black

$106.29

GLASS

Common Symptoms of the FGB557CEBA [Viewing 1 of 12]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broiler igniter not glowing

  • Customer: Steven from Silver Spring MD
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 5 of 8 people found this instruction helpful
1) Turn off the gas and disconnect the power

2) Remove oven door. There requires that you remove the two square drive (SD) bolts on the inside, partially close the door and lift it off the hinges.

3) Remove the grills.

4) At the back remove the rear shield (aluminum panel held by 2 SD sheet metal screws.

5) this... read more

range would not recognize the door wasn't shut

  • Customer: Anne from Portland OR
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
I was required to remove the control panel to access the plug as it had been broken and the switch had been shoved into the unit . It would have been extremely simple if the plug had remained on the outside surface
My son can now clean his dirty oven read more

Oven Door Light Switches Wrecked by Heat from Oven

  • Customer: Gregory from Croton-on-Hudson NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 1 of 4 people found this instruction helpful
Pull old switches out with pliers and replugged new switches. On main oven, plug casing was melted (wife left broiler on with oven door closed) so had to break apart old casing and individually plug the the wires into new switch and amazingly, it worked! Just gotta keep the door open when broiling............. read more