Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FGB557BBBA

FGB557BBBA Frigidaire Wall Oven - Overview

Get Parts and Repair Help for FGB557BBBA

If you know the wall oven repair part you need, you can browse the list of all parts on the FGB557BBBA, or you can search by name or part description. You can also find your part by where it is located on the FGB557BBBA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for FGB557BBBA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FGB557BBBA

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.68

Light Bulb

This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace wit...

$22.96

Light Bulb Lens

The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of the light bulb while the lens is off. This part is made of glass. The lens is a genuine Frigidaire part, sourced directly from the manufacturer, and is sold individually.

$67.92

Flat Style Oven Igniter - Broiler

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

$212.54

Flat Glow Bar Igniter

This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you may need to replace this part. The flat glow bar igniter is in the back of your gas oven. You will need to remove the access panel on the back of your oven to disconnect the igniter. Be sure that the gas source to the oven is shut off before you begin this repair. This part is sold individually.

$34.50

Light Lens Retainer Clip

This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirel...

$78.17

Exterior Drawer Glass - Black

$116.94

Outer Oven Door Glass - Black

$97.31

TRIM

$44.92

RACK

$27.52

END CAP

Common Symptoms of the FGB557BBBA

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broiler igniter not glowing

  • Customer: Steven from Silver Spring, MD
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver
  • 10 of 14 people found this instruction helpful
1) Turn off the gas and disconnect the power

2) Remove oven door. There requires that you remove the two square drive (SD) bolts on the inside, partially close the door and lift it off the hinges.

3) Remove the grills.

4) At the back remove the rear shield (aluminum panel held by 2 SD sheet metal screws.

5) this... read more

broken lens over oven light

  • Customer: Leslie from Warsaw, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 20 people found this instruction helpful
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service..... read more

Actually, the igniter I purchased is to be used on my furnace.

  • Customer: Lester from Waynesville, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 1 of 5 people found this instruction helpful
I have a Nordine model G2RC-105C19 LPG gas furnace. It was installed in 1995. The igniter went out and my son who was a propane gas appliance service tech installed one that was for our gas range. He said they were the same with the exception of a metal mounting plate on the stove igniter. Once the plate was removed, the igniter fit perfectly on the furnace.... read more