Models > FGB24S5ASB

FGB24S5ASB Frigidaire Oven - Overview

Get Parts and Repair Help for FGB24S5ASB

If you know the oven repair part you need, you can browse the list of all parts on the FGB24S5ASB, or you can search by name or part description. You can also find your part by where it is located on the FGB24S5ASB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for FGB24S5ASB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$28.02

Oven Temperature Sensor

Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porc...

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$189.19

Flat Glow Bar Igniter

$23.82

Clock Overlay - White

This part does not include the electronic control board. It is just the overlay or touch panel.

$16.25

SWITCH

$30.25

Light Lens Retainer Clip

This retainer secures the light lens to the oven cavity.

$17.21

Switch,rocker ,white ,oven light

$25.96

Door Hinge Receptacle

Sold individually.

$55.04

THERMOSTAT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating to desired temperature

  • Customer: Dan from Bellevue ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 53 of 79 people found this instruction helpful
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with tw... read more

Ignitor burnt out

  • Customer: Gregg from Naukati AK
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 8 people found this instruction helpful
I removed the broiler burner assembly held in by 5 screws across the inside top of the oven, as I removed the assembly the igniter slid out from the back of the oven and was attached to the assembly with a cannon plug, I disconnected the cannon plug and removed the whole assembly out of the oven and replaced the igniter which was attached by two screws and r... read more

Overlay was destroyed from use

  • Customer: Doug from Laramie WY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 4 people found this instruction helpful
Took back off the oven unscrewed the time control scaped old one off and put new one on. Than I put it back together again.
What a great place to shop!!! read more