Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$9.37
In Stock
Order within the next 10 hrs and your part ships today!
This OEM broiler pan and grate insert are cooking accessories used in your oven to broil food. The pan catches drippings and prevents them from falling into the appliance, while the grate insert ensur...
$68.24
In Stock
Order within the next 10 hrs and your part ships today!
This authentic OEM high-limit thermostat, also known as a limit switch or cooling fan thermostat, serves as a safety feature to prevent the oven from overheating. It monitors the temperature inside th...
$42.99
In Stock
Order within the next 10 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
June 25, 2021
Used oven cleaning for bottom oven after is was done cleaning bottom oven fails to work?
For model number FFET2726TSB
Hi Allen,
Thank you for your question. If your wall oven will not turn on after you have used the self-clean option, then the thermostat will need to be reset. There is a red reset button on it that you will need to press. It should be found in the back of your oven. In order to access the thermostat, you will need to remove the oven from the cabinet. First, turn off the oven circuit breakers and then open the oven door and remove the left and right side mounting screws that secure the oven to the cabinet. If your oven uses brackets instead of screws to secure it, use a special tool to remove them. Once you have completed this, you will need help to pull the oven from the cabinet. Once removed, place it on a sturdy surface and use a screwdriver to remove the screws securing the back panel. Hold the back panel in place as you are unthreading the last screw. Then lift and remove the back panel. You will now be able to press the reset button on the thermostat. Before placing the back panel back on, check the wiring and make sure it is not damaged. If everything is fine, follow the steps in reverse to reinstall the oven and turn the circuit breaker back on. Test the oven to see if it will work. If it does not, you will need to replace the thermostat. We hope this helps! Good luck with the repair!
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede
... Read mored are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.
Installation of the temparature sensor, one of the technician recommended parts took no time, just two screws and a snap off/snap on part. It did not fix the problem. I then replaced the main control panel, which requires more work, but didn't solce the ussue either. I then replaced the thermal fuse, which wasn't mentioned by tech support
... Read more, and required much more disassebly of the top panels of the stove, with still no fix to the problem. I am waiting to replace the thermostat heat sensor unit, the only other part in the circuit controlling power supply, requiring removal of the stove top again,