Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEP320YW1

FEP320YW1 Roper Range - Overview

Get Parts and Repair Help for FEP320YW1

If you know the range repair part you need, you can browse the list of all parts on the FEP320YW1, or you can search by name or part description. You can also find your part by where it is located on the FEP320YW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEP320YW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$12.91

Chrome Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with many electric ranges and cooktops.

$10.81

PAN,COMBINATION 6" CHROME

Sold individually. This part is located beneath the element and catches any spills.

$56.40

Bake Element - 2600W 240V

This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.

$46.48

Surface Burner - 8" - 2600W

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$7.16

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$16.65

Standard Y-Frame Surface Burner - 6" - 1500W

The manufacturer suggests replacing the receptacle at the same time.

$7.20

Touch-Up Paint - White

18ml

$49.09

Infinite Switch - 8"

This switch controls the stove top surface burner.

$6.33

Surface Burner Stabilizer Clip Kit

This kit contains one clip, a screw, and a nut.

$52.72

Broil Element - 240V

This broil element is found on the roof of the oven and has push-on terminals.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Joe from Greeley, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 520 of 532 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
. read more

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 462 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

lower back element stopped working

  • Customer: Bradley from Lexington, OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 455 of 538 people found this instruction helpful
I got the model number and ordered a replacement element from partselect, was shipped quickly and I installed it in about 30 minutes, it now works great read more