Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEP310YW1

FEP310YW1 Roper Range - Overview

Get Parts and Repair Help for FEP310YW1

If you know the range repair part you need, you can browse the list of all parts on the FEP310YW1, or you can search by name or part description. You can also find your part by where it is located on the FEP310YW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEP310YW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.16

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$8.21

Surface Burner Stabilizer Clip Kit

This kit contains one clip, a screw, and a nut.

$21.46

2 Piece Broiler Pan

The top of this part is now black.

$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$12.31

Anti-Tip Bracket Kit

This kit keeps your appliance from tipping. Comes with bracket, ring and 2 screws.

$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$24.04

SPRNG-DOOR

$22.95

PRIMER

$18.07

Aluminum Foil

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven wouldn't heat

  • Customer: Joe from Greeley, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 514 of 524 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
. read more

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 461 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

lower back element stopped working

  • Customer: Bradley from Lexington, OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 455 of 538 people found this instruction helpful
I got the model number and ordered a replacement element from partselect, was shipped quickly and I installed it in about 30 minutes, it now works great read more