Models > FEP310KV4

FEP310KV4 Roper Range - Overview

Get Parts and Repair Help for FEP310KV4

If you know the range repair part you need, you can browse the list of all parts on the FEP310KV4, or you can search by name or part description. You can also find your part by where it is located on the FEP310KV4 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEP310KV4 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.14

Drip Bowl - 6"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

$4.46

Drip Bowl - 8"

This part is located beneath the element and catches any spills.

$41.91

Bake Element

This bake element is found on the bottom of the oven.

$17.73

Receptacle Kit

This surface burner receptacle assembly comes with the receptacle, two wires, two wire nuts, and two pieces of heat-shrink tubing.

$2.70

Screw

This screw is sold individually.

$38.77

Oven Rack

Sold individually.

$6.21

Rear Drawer Glide

$44.80

Broil Element

Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original. This part is located on the inside of the oven on the top.

$33.57

Surface Burner Element - 8"

This plug-in surface burner element has looped terminal ends.

$18.07

2 Piece Broiler Pan

The top of this part is now black.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were rusty and rotting through

  • Customer: Michael from Kings Park, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 469 of 469 people found this instruction helpful
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better! read more

Just Replaced Ole Drip Bowls.

  • Customer: Roger from Osage Beach, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 375 of 379 people found this instruction helpful
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique company!!!! read more

Stove would not heat up

  • Customer: Tim from Pittsford, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 56 of 68 people found this instruction helpful
Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts. read more