Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEFL67GCA

FEFL67GCA Frigidaire Range - Overview

Get Parts and Repair Help for FEFL67GCA

If you know the range repair part you need, you can browse the list of all parts on the FEFL67GCA, or you can search by name or part description. You can also find your part by where it is located on the FEFL67GCA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEFL67GCA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEFL67GCA

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$22.86

Infinite Burner Switch - 8" - 240V

This switch controls the stove top 8" surface burner.

$6.13

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

$26.93

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$6.44

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$30.14

Oven Probe

This temperature sensor detects the temperature within the oven cavity.

$110.99

Broil Element - 2400W

This part goes inside of your oven at the top.

$20.59

Light Bulb Lens

This lens covers the interior oven light bulb.

$11.11

Anti-Tip Kit

This kit comes with two installation screws.

$7.00

Indicator Light Lens

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 935 of 968 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 658 of 752 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 410 of 419 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more