Models > FEF366ECE

FEF366ECE Frigidaire Range - Overview

Get Parts and Repair Help for FEF366ECE

If you know the range repair part you need, you can browse the list of all parts on the FEF366ECE, or you can search by name or part description. You can also find your part by where it is located on the FEF366ECE by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEF366ECE parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEF366ECE

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$18.21

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$23.99

Infinite Burner Switch - 8" - 240V

This switch controls the stove top 8" surface burner.

$6.11

Handle Mounting Screw

$3.29

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

$26.71

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$51.71

Bottom Panel

This is used as the "floor" of the oven cabinet. Note: Does not come with rivets or screws. Must be purchased locally.

$20.38

Light Bulb Lens

This lens covers the interior oven light bulb.

$15.61

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$111.98

Broil Element - 2400W

This part goes inside of your oven at the top.

$81.39

6" Radiant Element with Limiter - 1200W

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 868 of 898 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 641 of 735 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

oven did not heat

  • Customer: jack from chambersburg, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 403 of 410 people found this instruction helpful
removed screws pulled element out. removed wire from old element replaced with new element.very easy read more