Models > FEF366DCE > Instructions

FEF366DCE Frigidaire Range - Instructions

All installation instructions for FEF366DCE parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FEF366DCE
466-480 of 498
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake Element Did Not Heat.

  • Customer: Kendrick from Agawam MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Watched the video on Partselect before ordering the part, to see what I was getting into. Part arrived super quick. Removed bad element just as video described, and installed new element in opposite direction. Job was complete, and super was in the oven in less than 15 mins after arriving home from work. Anybody can do this repair, don't waste your money on a service call!

bake element caught fire and needed to be replaced

  • Customer: Betty from Midland TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
first pulled the breaker, then removed the oven door. One wire came out easily but the other side would not budge so we had to take off the back of the range. They had cought the wire up in a loop and so it had no give. Removed it from the loop so if it ever needs to be replaced again we won't have the same problem. Used the advice from other comments and it went as discribed. I hope others also removed the door as I can't imagine how much harder it would be with the door in place.

Oven quit on Thanksgiving Day

  • Customer: Michael from Herington KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Real easy to replace the heating element. Two screws and out came the old and in with the new one.

heating eliment had broken into

  • Customer: ALICE from NOBLESVILLE IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I had the part shipped directly to the rental house and the tenant installed it with no problem.

lower burner burnt in two!

  • Customer: Lynne from Woodland Park CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
after reading the very first reader report, I was happily amazed how easy the repair was. it took longer to unwrap the part than it did to undo two small nuts, unclip the wire, clip on the replacement burner, and redo both nuts. thanks again for the help. saved lots of time and money.

Door glass cracked

  • Customer: Mike from Collegeville PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Really straightforward - just took door off of the hinges and worked taking it apart until I got to the front glass that was cracked. Took it out and put the new piece in and reversed the process. Really easy and I got to clean each piece on the way back in to get rid of some spills.

bake and broil elements not working

  • Customer: James from Crescent City FL
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
The bake element is easy to change. the broil element is fairly difficult. The best way I found is to tape the broil element to the roof of the oven, then install the supports. That ended up not being the problem. The problem was the timer. After changing that, which took only 10 minutes oven is working great.

Electric Connector to mounting bracket too long

  • Customer: B A from Wolfeboro NH
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I had to remove the back of the range in order to cut away the sheet metal that was contacted by the bent terminals that had to be done to shorten them to clear the back sheet metal panel.

oven element burnt in two pieces

  • Customer: vicki from pomeroy OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Just followed the repair video provided...nothing to it!!! Very impress with the next day service and easy to follow video instruction..

Easy Peasy

  • Customer: Marolyn from Potosi MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Oven went out on Christmas Eve . . . yikes! Managed to get through the holiday by using my roaster and my husband was planning to call a repairman the day after Christmas. I told him to wait until I could do some research. I got on line, found this site and decided I could do it myself. I ordered the element on Thursday, received it on Friday. Great service! It took about 10 minutes to install, by following the video. (Took longer to find the right electric breaker than it did to change the element!)

I had placed aluminum foil on bottom and it adhered to the surface.

  • Customer: Marilyn from Logansport IN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I removed two screws and lifted out the ruined bottom. I set the new bottom in, but could not get the screws lined up so left them out. The bottom is heavy enough, it is not going anywhere. I am very grateful the part was available.

lens was broken

  • Customer: Kenneth from Coeur d'Alene ID
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
after pulling away from wall and unplugging remove 5 screws in upper back panel lift off being careful of sharp edges if part of lens is still in hole push it out towards the front insert lens from front of unit slide light assy over pin on back of lens replace back panel plug in range push back against wall check for level you're done

The bake element to our range had gone out.

  • Customer: Charles from OZARK MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Although I had a general idea of what to do, I watched a video on this website; it ensured me that I could repair this. Over all I spent 30 minutes repairing the oven, but 15 minutes of that was spent trying to find the right tool. I didn't have a screw driver with a square head, so I ended up putting a square bit in my electric drill. This WAS A VERY EASY REPAIR. On the video, the repairman took less than 3 minutes, but that was optimum. All you do is (1) make sure the breaker is off; (2) remove the bad element by taking two screws out at the back of the oven; (3) disconnect the wires coming from the oven; (4) hook the same terminals up to the new element; (5) push the wires back inside the oven body; (6) insert the screws into the holes on the new element; (7) tighten the screws to the oven body and YOU ARE THROUGH. THAT EASY!

bottom element

  • Customer: James from Surrency GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
1/4" nut driver, just took the screws out disconnect the element. Reversed the process. Really easy. and outstanding delivery.

Lower bake element broke in two.

  • Customer: John from Elko NV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Either disconnect power plug or shut off breaker to oven. Remove racks from oven. Remove the two screws from back of oven that hold element. CAREFULLY pull the ends of element from back of oven so as not to loose the connected wires. Disconnect wires from element terminals. (Be careful not to allow the wires to fall into the backside of oven) Reattach wires to the new element, carefully insert through the holes and reinstall screws.
All Instructions for the FEF366DCE
466-480 of 498