Models > FEF366CCE > Instructions

FEF366CCE Frigidaire Range - Instructions

All Instructions for the FEF366CCE
181 - 195 of 259
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rear drawer glide broke
The repair was as simple as reattaching the broken glider. No tools were needed.
Parts Used:
Rear Drawer Glide
  • Barbara from Concord, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced the infinite burner switch
I watched you vedio and done just as the vedio told me how to change the switch. When I got the switch on pluged it in turned it on and every thing work great. thank you very much.
Parts Used:
Infinite Burner Switch
  • Alvie from Pasco, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Front drawer gluide broke
Ordered part which arrived in 2 days, yeah!! Installation was really simple, took less than a minute. The online instructions/ video were very helpful! Excellent site to order parts!
Parts Used:
Front Drawer Glide
  • Rosemarie from Chalfont, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
two rear glides and one front glide had broken.
I watched the short video on the site that showed how to replace the glides. It was key since it showed how to use a screwdriver to remover the old slide. The new ones then popped right in place.
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • David from Claremont, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Front drawer guides broke
Popped out the old...snapped in the new. All of about 5 minutes or less.
Parts Used:
Front Drawer Glide
  • Michael from El Paso, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The drawer glide snapped in half
Ordered the replacement glide, received pretty quickly! : ) Snapped the broken part out with screw driver and popped the replacement glide in with my thumb! 1,2,3.... Pretty Happy!
Parts Used:
Front Drawer Glide
  • Alberta from East Glenville, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken rear Guide
Replaced the guides by following the instructions in the Video provided on the part information page. Really simple.
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • George from North Port, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Drawer Slide
I watched the repair tutorial and followed the instructions. The order went very well and the tutorial was spot-on. Nice.
Parts Used:
Rear Drawer Glide
  • Richard from Woodruff, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Large burner switch made popping and buzzing noises.
The video was a great help. I could have replaced the switch without watching it, but it gave me confidence that I was doing it right. Everything went just like he said it would. Burner seems to work better now and no more scary noises.
Parts Used:
Infinite Burner Switch
  • Glenda from Miles City, MT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Largest burner was not operational
After turning off the power to the unit, we took it out of the countertop and unscrewed the base of the unit. We then unplugged the damaged coil and plugged in the replacement part. We then screwed the base of the unit back on and replaced the unit in the countertop. The largest burner now works.
Parts Used:
Radiant Surface Element
  • Kelly from Marietta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Hot Surface Light won't turn off.
Unplugged stove. Quickly unscrewed back panel (4 screws). Popped the wires off one at a time attaching them to the new switch. Pulled the knob off the front, unscrewed screws, and put new switch in repeating previous steps in reverse. Put the panel back on, plugged it up, and pushed it back into place. Done.
Parts Used:
Infinite Burner Switch
  • Justin from Madison, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Drawer would not stay level or move easily
The drawer dropped down and would not easily open or shut or fit up good when closed. A quick inspection showed that one of the rear drawer guides was broken. The parts were ordered on a weekend and they showed up on Tuesday. We already had the pots and pans out of the drawer. It took about 10 minutes to put in the new guides (I replaced the one not broken also), clean and lubricate the drawer slides. Good as new. The repair video, although not necessary for this repair, was excellent. Thanks a bunch!
Parts Used:
Rear Drawer Glide
  • Kenneth from Ovilla, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broil element burn out
take back planel off, take wires off old element and intsall new element hookup wires, put back planel ..under one hour job
Parts Used:
Broil Element
  • christopher from big pine key, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
original drawer glides had broken over the years due to overloading
just slid drawer out all the way clipped new parts into place and reinstalled drawer-less than 1 minute to complete entire process-online store was very easy to use,great parts breakdown/pictures helping to ensure proper part selection/quick delivery/will be back for more parts when needed in future and will recommend your site to my friends
Parts Used:
Rear Drawer Glide Front Drawer Glide
  • william from clinton, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No heat to large coil; erratic heat with clicking noise to small coil
I followed the Parts Select Video that showed replacing an identical switch. Mine were another brand & style with different color wires. I took a picture of 1 to keep track of the wiring and removed it. I saw that the terminals were marked P, H1, H2, L1, & L2 so I put the wire from the same terminal onto the Parts Select switches & they work just fine now. The parts I got from you are heavier and a much better quality than the original equipment. I would also like to say that I was amazed at how fast this order was shipped, and the washer pump was a piece of cake thanks to your video.
Parts Used:
Infinite Burner Switch Infinite Burner Switch - Small Element - 240V
  • Mustafa from Pennsville, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FEF366CCE
181 - 195 of 259