Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEF336FMC

FEF336FMC Frigidaire Range - Overview

Get Parts and Repair Help for FEF336FMC

If you know the range repair part you need, you can browse the list of all parts on the FEF336FMC, or you can search by name or part description. You can also find your part by where it is located on the FEF336FMC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for FEF336FMC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEF336FMC

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.15

Bake Element - Push On Terminals - 240V

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven.

$6.00

Rear Drawer Glide

Sold individually.

$4.44

Front Drawer Glide

Sold individually.

$22.86

Infinite Burner Switch - 8" - 240V

This switch controls the stove top 8" surface burner.

$105.75

Electronic Clock Timer

This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.

$6.13

Main Terminal Block Kit

Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.

$25.38

PROBE

$26.93

Infinite Burner Switch - Small Element - 240V

This switch controls the stove top surface burner.

$6.44

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$110.99

Broil Element - 2400W

This part goes inside of your oven at the top.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 940 of 973 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 659 of 753 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

drawer glides were broke on front and back

  • Customer: bryan from sparta, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 521 of 534 people found this instruction helpful
used a screwdriver pushed the old ones out put the new in. the video instructions were great. read more