FEF336ECG Frigidaire Range - Instructions

I just followed the video. Unplug the stove, undo two screws holding the element, pull it out to get to the terminals, pull off the electrical terminals, connect the terminals to the new element, push back in the new element, replace the screws, plug in the stove and set the clock. It did not take even five minutes from start to finish. You will need a flashlight to see as the oven light doesn't come on while the stove is unplugged!

I watched the video to make sure I understood what I needed to do. I did just as the video right down to installing the new one before replacing the wires, which was the hardest part the connectors were on tight. Replaced all screws tested to see if oven worked which it did. Thanks for the video.

My oven went out the day before Christmas. After calling around and getting high quotes from several 24/7 repairmen I decided to do the repair myself. I searched YouTube and found the video from PartSelect on how to repair my oven and decided to order my part. Due to the holidays there was a shipping delay but once I got the replacement part it was easy to repair. Just make sure that you are aware of the tools needed to do your repair. You save a LOT of time that way. My repair probably would have taken me only 30 mins but it took over 2 hrs due to 2 trips to the hardware store.

Emptied the drawer of storage items. Removed the drawer and attached the new rear drawer glide. Replaced the door in the range and refilled the drawer.

Just moved into this house and inherited the oven so I don't know how old it is but I had to put something down in order to submit this review. Popping the glides in place took seconds. I am amazed that I found the parts so easily online and that they arrived so quickly. Usually the simplest of things turns into a time consuming project for me. Thank you!

using a screwdriver and nut driver I installed new element after shutting off electricity at fuse box. fit easily. works great. Drawer glides were broken and I installed two of these as well. Easy. Works great too.

removed the two screws holding the element in place, pulled the wire connectios off of each end, reversed the procedure and whala!! what an easy task, and I was just about ready to spend $556 dollars to buy a new stove, this part cost $23 dollars.

I unscrewed the two 1/4 in. nuts and disconnected both sides. I then reconnected the new element. Works great. Great price and fast shipping.

Took back cover off 2 screws held the switch then moved wires one at a time from old switch to the new one put everything back plugged in stove everything worked

to install the element was somewhat easy but turn the oven on there is no heat either on the upper or replaced element the light on the range shows it workings so it no doubt has an internal problem that will require a electrician in order to locate the problem due to the noise that i heard when the element went out-i am not surprised that it needs other work

rec'd rear drawer glide 2 days after ordering opened package removed from wrappers snapped in place put drawer back in
took nearly 2 minutes to complete 1 1/2 of which was opening packages if you add ten minutes to find and order still under 15 minutes total have used this company before and will use any time something like this is needed. rebuilt my 18 year old dryer motor belts lint filter saved money and got a "new" but old quality maytag same with washer easy to order. quality help if or when needed speedy delivery keep them in business please

The DIY video on the PartSelect website was very useful as it showed how to do the repair without taking the panel off the whole back of the stove. It was a very simple repair being armed with the knowledge shown in the video.

There was a video on here that give the simple instructions. Very easy

Disconnect power cord, removed 2ea nut screws from inside the oven connecting heating element. Pull connectors thru the oven wall. Removed 1ea connector from each element connection. Replaced. Reinstall in reverse order.

This was an easy repair. I was going to call my appliance guy when I read how easy it was to replace on this site I decided to try it myself instead. It was that easy. I removed the old element and installed the new one in under 15 minutes. The video showed how easy it was that I had to try it myself and I am glad I did. I saved a bunch.