Models > FEC3X7XAB5

FEC3X7XAB5 Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC3X7XAB5

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC3X7XAB5, or you can search by name or part description. You can also find your part by where it is located on the FEC3X7XAB5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC3X7XAB5 [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$29.87

Control Knob - Black

Sold individually.

Order within the next 9 hrs and your part ships today!
$183.57

ELEMENT-SURFACE - Dual

Order within the next 9 hrs and your part ships today!
$29.82

LAMP

$5.91

SCREW

Order within the next 9 hrs and your part ships today!
$170.89

Radiant Burner Element with Limiter - 8" - 2200W

Order within the next 9 hrs and your part ships today!
$7.46

Hex Nut

Order within the next 9 hrs and your part ships today!
$32.55

BUSHING

Order within the next 9 hrs and your part ships today!
$5.89

SCREW

Order within the next 9 hrs and your part ships today!

DISCONTINUED

$5.91

SCREW

Order within the next 9 hrs and your part ships today!

Common Symptoms of the FEC3X7XAB5 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

rf burner was not working

  • Customer: Neil from Jessup PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 25 of 35 people found this instruction helpful
First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the three wires, put the ho... read more