Models > FEC36S6ESB

FEC36S6ESB Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC36S6ESB

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC36S6ESB, or you can search by name or part description. You can also find your part by where it is located on the FEC36S6ESB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$79.43

6" Radiant Element with Limiter - 1200W

Order within the next 9 hrs and your part ships today!
$32.16

Surface Burner Switch - 8"

This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.

Order within the next 9 hrs and your part ships today!
$28.68

Single Control Knob

This is only 1 knob and is sold individually.

Order within the next 9 hrs and your part ships today!
$96.23

Radiant Surface Element

This part is the heatsource.

Order within the next 9 hrs and your part ships today!
$32.64

Surface Burner Switch - 6"

This switch controls the stove top surface burner.

Order within the next 9 hrs and your part ships today!
$5.91

SCREW

Order within the next 9 hrs and your part ships today!
$124.34

ELEMENT

Order within the next 9 hrs and your part ships today!
$80.21

Surface Burner Switch - 6" Warmer

$19.18

Retainer Bracket

Order within the next 9 hrs and your part ships today!
$32.55

BUSHING

Order within the next 9 hrs and your part ships today!

Common Symptoms of the FEC36S6ESB [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

right front element burned out

  • Customer: Larry from Wenatchee WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 24 of 25 people found this instruction helpful
FIRST I UNPLUGGED THE GLASS TOP RANGE. While locating the part on the PartSelect diagram I was also able to determine how to access the burned out element. It was very simply to remove three phillips head screws in the front top( above the oven)area of the range, slide the topof the range forwardand lift it up, remove one screw holding the metal bar under th... read more

burner would not heat

  • Customer: Ed from Winthrop MA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 15 of 17 people found this instruction helpful
killed the 50 amp power. removed 3 screws from above oven door slid out cook top, dropped brace holding 2 front burners. The connector corroded off had to look for a high heat connector to connect to the element, after that just screwed everything back together. read more

Burner failed due to poor manufacturing quality

  • Customer: LaVern from Cedar Falls IA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 10 of 13 people found this instruction helpful
Disconnected power. Removed hold down fasteners for stove top. Fortunately, I did not flue down or use the double back tape to secure stovetop to counter. If this adhesive were used, it is possible I would have had great difficulty in removing range. I did not disconnect the wiring, but turned the range top over to access the cover. I removed the cover... read more