Models > FEC32S6HBB

FEC32S6HBB Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC32S6HBB

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC32S6HBB, or you can search by name or part description. You can also find your part by where it is located on the FEC32S6HBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC32S6HBB [Viewing 4 of 4]

$5.62

SCREW

$145.87

Surface Burner Element with Limiter - 6" - 1200W

$105.64

Surface Burner Switch

$92.29

Ceramic Surface Element - Large

$53.70

Infinite Switch Kit

$179.96

ELEMENT-SURFACE - Dual

PANEL

$18.64

Retainer Bracket

$29.18

KNOB

$4.61

SPACER

Common Symptoms of the FEC32S6HBB [Viewing 1 of 63]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burned out burner

  • Customer: Lori from Winter Haven FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 27 of 35 people found this instruction helpful
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of element... read more

Burner eye would only produce High Heat on all settings

  • Customer: scot from keller TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 4 of 16 people found this instruction helpful
Ordered a new Surface Burner Switch to replace the failed unit.
When I opened the burner lid, I could see the insulation on all the wiring for the burners had fallen apart and wiring was exposed. The wiring for all 4 burners was exposed as the insulation had deteriorated and fallen off over 80% of the circuits. It was just blind luck there was not a fi... read more

cooktop burner would not go on

  • Customer: Clement from Fellsmere FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Turn off braker,lift cooktop from counter and remove acces panel unscrew switch from cooktop and replace one wirer at the time than resrew everything together. read more