Models > FEC32S6ABA

FEC32S6ABA Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC32S6ABA

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC32S6ABA, or you can search by name or part description. You can also find your part by where it is located on the FEC32S6ABA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$81.95

Radiant Burner Element with Limiter - 9" - 2500W

$5.62

SCREW

$145.87

Surface Burner Element with Limiter - 6" - 1200W

$163.16

Radiant Burner Element with Limiter - 8" - 2200W

$105.64

Surface Burner Switch

$5.71

SCREW

$31.64

BUSHING

$25.96

LIGHT

$5.71

SCREW

$18.64

Retainer Bracket

Common Symptoms of the FEC32S6ABA [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burned out burner

  • Customer: Lori from Winter Haven FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 23 of 30 people found this instruction helpful
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of element... read more

9" radiant burner element stopped working.

  • Customer: STEPHEN from GREENBUSH ME
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 22 people found this instruction helpful
VERY IMPORTANT! kill the circuit breaker to the unit and/or unplugged it! 2 screws hold the ceramic glass top to the lip @ top of oven--remove them and the top can be lifted up to expose all the burner elements and wiring--remove the 2 end screws that hold the retainer bracket for the burners - then remove the 2 screws that hold the burner in question to the... read more

rf burner was not working

  • Customer: Neil from Jessup PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 21 of 28 people found this instruction helpful
First I removed 2 screws that held the stove top in place. Raised the stove top and support it. Then, I removed the hold down spring for the burner and removed three wires from the old burner. I found that the connector on the white wire was spread open too much so I crimped it closed for a better fit on the terminal. I reattached the three wires, put the ho... read more