Models > FEC30S7EBB > Instructions

FEC30S7EBB Frigidaire Cooktop - Instructions

All installation instructions for FEC30S7EBB parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FEC30S7EBB
1-7 of 7
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burned element

  • Customer: Tom from Wallingford CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 24 of 43 people found this instruction helpful
Flip up top, remove wires and two screws. Replace in opposite way. Turn off power to stove first.

burner wouldnt heat

  • Customer: KEVIN from CADET MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 23 people found this instruction helpful
took out 2 screws and disconnected wires .

Element Burn out

  • Customer: Jesse from Forest VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 17 people found this instruction helpful
Self easy

PS Great service Super FAST.
Thanks Jesse

cooktop burner would not go on

  • Customer: Clement from Fellsmere FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Turn off braker,lift cooktop from counter and remove acces panel unscrew switch from cooktop and replace one wirer at the time than resrew everything together.

"hot" indicator light on glass cook top burned out

  • Customer: Kathleen from Middlebury VT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing pots / pans in cabinet below cook top and turning off the power, I was able to remove the panel held by 2 screws. Pulling the old light out was just a little difficult as it came in pieces. New one popped right in, hooked up terminals, replaced the panel and that was it !!

burner wouldn't heat up

  • Customer: Stephen from Columbia SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I unplugged the stove. Then I lifted up the top of the stove to expose the burners. I unscrewed the necessary screws and plugs that attached the old burner to the stove. Then I simply put the new one back in it's place. The stove was one of those flat burner stoves, and I was a little concerned that I would be able to do it. The repair man wanted to charge me $150.00 for labor.

burner would not heat up

  • Customer: MARGARET from MILFORD PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
simple, removed a few screw's, unplugged old burner, plugged in the new one. that was basically it. easy!
All Instructions for the FEC30S7EBB
1-7 of 7