Models
>
FEC30S6DQB
FEC30S6DQB Frigidaire Cooktop - Overview
Sections of the FEC30S6DQB
[Viewing 5 of 5]
Manuals & Care Guides for FEC30S6DQB
Click to downloadInstall
Installation Instructions
(1.69MB)
Manual
Owner's Manuals
(1.49MB)
Wiring
Wiring Diagram
(0.19MB)
Keep searches simple, eg. "belt" or "pump".
Surface Burner Switch - 8 Inch
PartSelect #: PS2342881
Manufacturer #: 318293825
This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.
$71.82
In Stock
Screw
PartSelect #: PS461124
Manufacturer #: 5303288565
This is an authentic mounting screw, which works with ranges, wall ovens, cooktops and warming drawers.
$9.48
In Stock
Surface Burner Switch - 6 Inch
PartSelect #: PS2342880
Manufacturer #: 318293824
This switch controls the stove top surface burner.
$71.87
In Stock
Screw
PartSelect #: PS417260
Manufacturer #: 131243700
Sold Individually. Pan Head Screw - 8-18ab X 0.375
$7.24
In Stock
Radiant Surface Element - Large - 2200W
PartSelect #: PS1993817
Manufacturer #: 903118-9010
$199.64
In Stock
Surface Burner Element - 6 Inches - 1200W
PartSelect #: PS978580
Manufacturer #: 318198817
$155.35
In Stock
Surface Element - 9 Inch - 2500W
PartSelect #: PS978581
Manufacturer #: 318198819
$187.10
Special Order
Questions And Answers for FEC30S6DQB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FEC30S6DQB
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
switch was not turning off had to jiggle it to go off
no problem slightly different shape than original but labels for wires matched up mounting screws aligned perfectly works great
Parts Used:
-
Leon from Deer Paerk, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
19 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large Burner was not heating up properly
Don't be put off when you first get the new switch. It's not an exact duplicate to the one your replacing. You will notice that the new switch has 5 electrical connectors and you'll see 6 wires on the old one. start by removing the L1 wire(s) off the old switch, you will see that it actually has 2 wires connected to the same connector.
... Read more
Now connect to the L1 position on the new switch. Continuie with taking one wire at a time off the old switch and connect to the corresponding connector on the new switch (all the connectors are coded the same, ex. L1, P, etc....) Once complete the switch and burner worked perfectly
Read less
Parts Used:
-
Michael from Oconomowoc, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
9 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner got to hot
-
larry from chatsworth, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
12 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!