Models > FEC30S6ASF

FEC30S6ASF Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC30S6ASF

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC30S6ASF, or you can search by name or part description. You can also find your part by where it is located on the FEC30S6ASF by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC30S6ASF [Viewing 5 of 5]

$27.61

Single Control Knob

This is only 1 knob and is sold individually.

$77.64

6" Radiant Element with Limiter - 1200W

$30.95

Surface Burner Switch - 8"

This switch controls the large surface burner. As per manufacture the original screws will damage new switch. New screws are needed.

$92.61

Radiant Surface Element

$5.62

SCREW

$31.21

Surface Burner Switch - 6"

This switch controls the stove top surface burner.

$25.96

LIGHT

$121.89

ELEMENT

$18.64

Retainer Bracket

$31.64

BUSHING

Common Symptoms of the FEC30S6ASF [Viewing 1 of 208]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

right front element burned out

  • Customer: Larry from Wenatchee WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 19 of 20 people found this instruction helpful
FIRST I UNPLUGGED THE GLASS TOP RANGE. While locating the part on the PartSelect diagram I was also able to determine how to access the burned out element. It was very simply to remove three phillips head screws in the front top( above the oven)area of the range, slide the topof the range forwardand lift it up, remove one screw holding the metal bar under th... read more

burner would not heat

  • Customer: Ed from Winthrop MA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Socket set
  • 11 of 13 people found this instruction helpful
killed the 50 amp power. removed 3 screws from above oven door slid out cook top, dropped brace holding 2 front burners. The connector corroded off had to look for a high heat connector to connect to the element, after that just screwed everything back together. read more

Burner failed due to poor manufacturing quality

  • Customer: LaVern from Cedar Falls IA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 8 of 11 people found this instruction helpful
Disconnected power. Removed hold down fasteners for stove top. Fortunately, I did not flue down or use the double back tape to secure stovetop to counter. If this adhesive were used, it is possible I would have had great difficulty in removing range. I did not disconnect the wiring, but turned the range top over to access the cover. I removed the cover... read more