Models > FEC30S6ASD

FEC30S6ASD Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC30S6ASD

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC30S6ASD, or you can search by name or part description. You can also find your part by where it is located on the FEC30S6ASD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC30S6ASD [Viewing 4 of 4]

$27.61

Single Control Knob

This is only 1 knob and is sold individually.

$77.98

Radiant Burner Element with Limiter - 9" - 2500W

$5.62

SCREW

$5.71

SCREW

$105.64

Surface Burner Switch

$92.29

Ceramic Surface Element - Large

$31.64

BUSHING

$131.07

Surface Burner Element - 6" - 1200W

$25.96

LIGHT

$5.62

SCREW

Common Symptoms of the FEC30S6ASD [Viewing 1 of 133]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

9" radiant burner element stopped working.

  • Customer: STEPHEN from GREENBUSH ME
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 20 of 24 people found this instruction helpful
VERY IMPORTANT! kill the circuit breaker to the unit and/or unplugged it! 2 screws hold the ceramic glass top to the lip @ top of oven--remove them and the top can be lifted up to expose all the burner elements and wiring--remove the 2 end screws that hold the retainer bracket for the burners - then remove the 2 screws that hold the burner in question to the... read more

Connection to surface element was broken

  • Customer: javier from oceanside CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 14 of 22 people found this instruction helpful
I went all the way around the unit and removed screws holding top of unit in place. Removed knobs holding front panel in place. Remove control panel. top should come off. Remove screws attaching element top and metal frame. Undo bracket and remove element. Disconnect wires. Remember where they were attached.
Replace element and reverse steps. read more

One element in a glasstop range would not engage

  • Customer: Kwok from Silver Spring MD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Socket set
  • 8 of 12 people found this instruction helpful
All of a sudden, one element in our glasstop range would not light and heat up. My wife and I were not sure what to do. Looked it up on the internet, found that you can do it yourself as others desribed the process of accessing the elements below. We decided to do that. It takes two people as one is holding up the glass because it opens like a car hood. ... read more