Models > FEC26C2AQC

FEC26C2AQC Frigidaire Cooktop - Overview

Get Parts and Repair Help for FEC26C2AQC

If you know the cooktop repair part you need, you can browse the list of all parts on the FEC26C2AQC, or you can search by name or part description. You can also find your part by where it is located on the FEC26C2AQC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEC26C2AQC [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Drip Bowl - 8"


Chrome Drip Bowl - 6"

Sold individually.


Surface Element - 8" - 220V

4 Turn.


Surface Element - 6"


Surface Burner Terminal Block Kit

This kit includes the terminal block, mounting bracket, contact with wires and wire nuts. It provides a way of connecting individual electrical wires and offers protection of the ...











Common Symptoms of the FEC26C2AQC [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Block terminal burnt out, hot plate not working, needed to replace the terminal block

  • Customer: Shaun from Whitehall MD
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers
  • 6 of 7 people found this instruction helpful
This should take approx 15-30 mins. It took me 1.5 hours as I pushed the terminals into the wrong end of the block. It's very difficult to get them out when you do that... However, there are no easy instructions on the block or in the instructions to tell you which end to push the terminals into!!! So, with a 50:50 chance of getting it right, I got it w... read more

Burner wouldn't stay hot.

  • Customer: Billy from Lovelady TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
I pulled out the old element and the new one just plugged right in. read more

Two of the rangetop controls would intermittently go to hi-heat

  • Customer: L E from Houston TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
The left rear (small burner) was the first to start intermittently having only off or high heat. Then the left front (large burner) started (probably sticking contacts). Since two had gone bad, I ordered 4 new ones to make a complete repair. I was pleasantly surprised to discover that the large burner controllers had been "beefed up" to a heavier duty con... read more