Models > FEB386WECG

FEB386WECG Frigidaire Oven - Overview

Get Parts and Repair Help for FEB386WECG

If you know the oven repair part you need, you can browse the list of all parts on the FEB386WECG, or you can search by name or part description. You can also find your part by where it is located on the FEB386WECG by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for FEB386WECG parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FEB386WECG [Viewing 4 of 4]

$67.18

Bake Element

This bake element is found on the bottom of the oven.

$24.23

Oven Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$3.51

Main Terminal Block Kit

$18.75

Light Bulb Lens

This lens covers the interior oven light bulb.

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$43.91

Broil Element

$31.32

Broiler Pan

Pan Only. Must order insert separately.

$24.36

Oven Light Socket

$52.21

Broiler Pan Grate Insert

Broiler pan sold separately.

$41.55

Oven Rack

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven element broken

  • Customer: Van from Sanford NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 26 of 27 people found this instruction helpful
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself. read more

Broil element wasn't working...

  • Customer: Kevin from Alexandria VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 25 of 32 people found this instruction helpful
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to... read more

Above 400 beeper went off & code numbers came up on read out

  • Customer: Russell from Lake Havasu AZ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 22 of 26 people found this instruction helpful
Cut off power at fuse panel. pulled stove out from wall went behind stove removed back panels in area of sensor that I could see from the front side, inside oven. Located sensor from rear & unpluged senser from wiring bundle reached inside oven & removed screws from sensor. Pulled sensor out & threaded wire through hole. Took old & new sensors to bench in... read more