Models > FDB4315LFS0

FDB4315LFS0 Frigidaire Dishwasher - Overview

Get Parts and Repair Help for FDB4315LFS0

If you know the dishwasher repair part you need, you can browse the list of all parts on the FDB4315LFS0, or you can search by name or part description. You can also find your part by where it is located on the FDB4315LFS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for FDB4315LFS0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$11.40

Upper Spray Arm

This part is located on the top of the tub.

$10.60

Tub Gasket

The gasket provides a waterproof seal between the tub and the door.

$13.23

Bottom Gasket

This gasket goes on the bottom of the dishwasher door. Note: Once the gasket is replaced and you continue to have water around the bottom corners of the door panel, you may need t...

$3.27

Heating Element Brass Nut

This nut is sold individually. It is used to install the heating element.

$43.18

Drain Pump

The pump ejects the water from the unit.

$52.57

Middle Spray Arm - Gray

$41.75

BASKET SILVERWARE 2

$15.42

HOSE

$16.73

Lower Rack Wheel with Clip

Sold individually. Order quantity required.

$16.98

Friction Door Cable

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The spray arm would fall off during the washing cycle.

  • Customer: Roy from Worcester MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 439 of 443 people found this instruction helpful
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the a... read more

Bottom Door Seal fell apart and started leaking.

  • Customer: Scott from Flowood MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 72 of 82 people found this instruction helpful
First I opened the door all the way. Second I reached down to the bottom gasket then grabed it on the right end of the seal that is on the right side of the door. Then I pulled the end outward from the bottom of the door toward the heater coil in the bottom of the washer. It came out real easy. You see it just snaps into a little plastic groove under the doo... read more

dishwasher was leaking water

  • Customer: Charles from Milton FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 57 of 69 people found this instruction helpful
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in. read more