Models > FDB200RBW0

FDB200RBW0 Frigidaire Dishwasher - Overview

Get Parts and Repair Help for FDB200RBW0

If you know the dishwasher repair part you need, you can browse the list of all parts on the FDB200RBW0, or you can search by name or part description. You can also find your part by where it is located on the FDB200RBW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for FDB200RBW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$7.20

Single Rack Roller Kit

This kit comes with one axel/clip and one wheel/roller.

$4.95

ROLLER TUB GREY

$3.27

Heating Element Brass Nut

This nut is sold individually. It is used to install the heating element.

$16.98

Door Gasket

This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.

$5.45

Upper Dishrack Roller and Axle Kit

This is sold individually. Please order quantity required.

$5.96

Kit - includes 8 Screws & 8 Washers

Use for the upper rack rollers on the upper rack of your dishwasher.

$17.45

Upper Dishrack Track End Cap

Sold individually.

$5.68

SCREW

$0.68

SCREW

$33.29

Motor Shaft Seal Kit

This motor shaft seal kit does not include a macerator blade, but does come with wash and drain impellers(upper and lower).

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower Rack Roller missing

  • Customer: Sandra from Mount Vernon WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 361 of 363 people found this instruction helpful
Took the roller out of the package, snapped it into place. Less than 15 seconds. Works good as new. read more

Water leaking under the dishwasher

  • Customer: Dennis from Tryon NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 34 of 36 people found this instruction helpful
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away... read more

Missing 2 rollers in lower basket

  • Customer: Fred from Landis NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 63 of 123 people found this instruction helpful
Alighned the bracket and pushed in. read more