Models > FCM5SMBWH

FCM5SMBWH General Electric Freezer - Overview

Get Parts and Repair Help for FCM5SMBWH

If you know the freezer repair part you need, you can browse the list of all parts on the FCM5SMBWH, or you can search by name or part description. You can also find your part by where it is located on the FCM5SMBWH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FCM5SMBWH [Viewing 1 of 1]

$20.71

Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

COLD CONTROL

$24.57

BASKET

$2.42

DIAL-C0LD CONTROL

$35.66

OVERLOAD PROTECTOR

$164.92

DRAIN PLUG OUTER

$37.00

PTC-RELAY

$101.45

LID FOAM ASM

$7.68

DIVIDER

$3.41

CONTROL PANEL

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

compressor not starting

  • Customer: H.K. from Seagoville TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 11 people found this instruction helpful
Refrigerator is not cooling. Light and fan working. Changed the capacitor.. Still not cooling. Back to discovery mode.It may be the timer
Certainly not PartSelect's fault. They have great service. read more

Compressor not coming on

  • Customer: Kevin from Morris IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Had to e-mail GE for electrical schematic. Checked voltages to compressor. Jumpered compressor to see if it would even come on. Found bad run capacitor. Fixed. read more

A power surge made my side by side refrigerator stop working

  • Customer: Country at from SAYRE OK
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I started at the compressor and replaced the overload and the Ptcr first and that did not make the compressor start running again, so I replaced the capasitor and it still did not start, so I bit the bulett and replaced the Main Control Board and that is what I should have checked first, when I removed the old one I found a little burnt spot on the back that... read more