Models > FCM5SMAWH

FCM5SMAWH General Electric Freezer - Overview

Get Parts and Repair Help for FCM5SMAWH

If you know the freezer repair part you need, you can browse the list of all parts on the FCM5SMAWH, or you can search by name or part description. You can also find your part by where it is located on the FCM5SMAWH by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for FCM5SMAWH parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the FCM5SMAWH [Viewing 2 of 2]

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$7.95

Compressor Relay

The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

$12.82

Power Cord

$10.46

HINGE

COLD CONTROL

$24.57

BASKET

$2.56

DIAL-C0LD CONTROL

$165.09

DRAIN PLUG OUTER

$7.68

DIVIDER

DRAIN PLUG INNER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

FREEZER & FRIG WERE NOT COLD

  • Customer: Sam from Cooper City AL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 34 of 52 people found this instruction helpful
First I removed the rear cover, located at the bottom of the refrigerator. Then I cleaned out the dirt & dust on and around the compressor. The relay has a cover, that is secured with a spring loaded clip. To release the clip, push in with your fingers, while disengaging the end clip with a screwdriver. Once one side is off the other lifts off. Remove c... read more

compressor running and hot, refer and fridge room temp.

  • Customer: Charles from Durham CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked. read more

Starter/overload assembly and run capacitor were bad

  • Customer: Colby from Blanding UT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good. read more