Models > FCD12TFA0

FCD12TFA0 Frigidaire Refrigerator - Overview

Get Parts and Repair Help for FCD12TFA0

If you know the refrigerator repair part you need, you can browse the list of all parts on the FCD12TFA0, or you can search by name or part description. You can also find your part by where it is located on the FCD12TFA0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for FCD12TFA0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$0.50

Levelling Leg

$13.93

Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.

$5.20

Hexagonal Screw

$5.52

Hex Head Screw

$7.52

Door Hinge Pin Bearing

This white hinge pin bearing pivots the freezer and refrigerator door.

$28.71

Defrost Drain Pan Kit

This kit includes the drain pan, thermal mastic, sound dampening pad and 2 retainer wires. This part mounts to the top of the compressor.

$7.36

SWITCH-LIGHT/LAMP

$1.52

WASHER

1/4" x 5/8"

$9.06

DRIER-FILTER

$7.87

Lower Hinge Pin

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip pan had rusted & was leaking water on the floor

  • Customer: John from Forest VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Wrench(Adjustable)
  • 4 of 5 people found this instruction helpful
The BIG problem was getting the old drip pan off. The bolt on top of the compressor was too long to allow the removal of the old drip pan. I removed the old drip pan by cutting most of it away with tin shears then cutting the remaining part of the pan around the bolt with a hack saw (taking care not to damage freon lines and raising the pan above the threads... read more

Drain pan for refrigerator

  • Customer: Lynda from Rocky Point NY
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 1 of 3 people found this instruction helpful
Took old defrost pan off, put new one on. Had to bend new defrost pan a little for it to fit.. read more

Deforst Drain Pan rusted out

  • Customer: Gerald from Goldsboro NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Wrench set
  • 0 of 0 people found this instruction helpful
The old drain pan had a 1 ½” tall bushing attached to the center of the pan. The new pan did not have this bushing which was great. I had to cut about 1 inch off the bushing to remove the old pan. Also after cutting the bushing I had to screw the bushing off after cutting the old pan from the bushing. I installed new pan onto the ½” of threads that was le... read more