Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FC11

FC11 Maytag Food Waste Disposer - Overview

Get Parts and Repair Help for FC11

If you know the food waste disposer repair part you need, you can browse the list of all parts on the FC11, or you can search by name or part description. You can also find your part by where it is located on the FC11 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your food waste disposer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.02

Screw

This screw is sold individually.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$3.02

Hose Clamp

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original. The hose clamp is about 2 inches in diameter and mad...

$3.02

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$9.03

CONNECTOR

SPLASH SHIELD W/SUPPO

$6.04

Screw, 6-32 X 1/2

GASKET FOR

SUPPORT RI

SINK FLANG

Common Symptoms of the FC11

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Elbow Gasket was worn out

  • Customer: John from Schaumburg, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Wrench (Adjustable)
  • 0 of 1 people found this instruction helpful
Your website gave me the schematic, the part number, and sent it to me. The Correct Part made the repair easy.
JonS. read more

Splash shield was old and would not stay in place. It would drop down into disposal.

  • Customer: Stephen from Rancho Santa Fe, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 13 people found this instruction helpful
Just replace old splash shield read more