Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FAV6800AWW > Parts

FAV6800AWW Maytag Washer - Parts

All parts for the Maytag Washer FAV6800AWW

Below is a list of all parts for the Maytag Washer FAV6800AWW - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the FAV6800AWW
1-14 of 132
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.56

INLET HOSE

This hose can handle hot or cold water and is five feet long.

$5.51

Hose Clamp

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

$9.14

Leveling Leg and Pad

This leveling leg, which includes a lock nut and a pad, is used to keep washing machines still and balanced. If your washer shakes and moves excessively, then this could be an easy...

$2.96

Screw

Sold Individually.

$122.39

Drain Pump - 120V 60Hz

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

$4.48

Inlet Hose Washer

This high-pressure inlet hose washer, or gasket, is used with many washing machines, refrigerators, and dishwashers to create a watertight or airtight seal in the appliance. It is black in color, made of rubber, and about 1 inch in diameter. Rubber gaskets can get dry and brittle over time, causing them to lose their integrity and malfunction or crack, which will compromise the seal. It is recommended to check other seals before ordering this part in case they also need to be replaced. This is an OEM part sourced directly from the genuine manufacturer.

$10.25

Screw & Fastener Kit - Front Panel

$193.69

Clutch and Pulley Assembly

$5.97

Hinge Bushing

$5.83

Clamp

This clamp is sold individually.

$5.81

Cabinet Top Clip

$116.56

Lid Lock - Left Side

$46.16

Outer Tub Splash Guard

*May be different in appearance but will function as the original part.

$29.40

TUB SEAL

All Parts for the FAV6800AWW
1-14 of 132