Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FAFS4474LR0

FAFS4474LR0 Frigidaire Washer - Overview

Get Parts and Repair Help for FAFS4474LR0

If you know the washer repair part you need, you can browse the list of all parts on the FAFS4474LR0, or you can search by name or part description. You can also find your part by where it is located on the FAFS4474LR0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$39.78

Door Striker

This part is found on the door of your washer and keeps your door closed for use.

$67.78

Door Hinge with Bushings

This part attaches to the outside of the front door panel to help with the door open and closing properly.

$5.89

SCREW

Sold individually.

$19.27

Spring-Held Bellow Clamp

$6.03

SCREW

$90.26

Door Glass

$29.70

HOSE

$88.42

DOOR LOCK/SWITCH AS

$13.96

VANE

$2.46

SCRW, 10-16 X .75

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Door Striker broken

  • Customer: Susan from Oakland, ME
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 55 of 64 people found this instruction helpful
The door striker of the my front loading washing machine is plastic and breaks very easy. The small store I brought it from is now closed and I can't get the part and the last time I did order the part it took a least two weeks for it to arrive and my wash pile was huge. I ordred your part and in two days I had it! Much easier than the 65 dollars charge to h... read more

Door Striker broke which was a result of the hinge problem.

  • Customer: Paul from Grinnell, IA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 46 of 64 people found this instruction helpful
Removed the screws holding the door. (One was stuck a little so used an air drill with Phillips head to get the torque needed but someone with a strong grip could have done it as it came out very easily). I removed most of the screws holding the front to back of door to exchange the hinge. There was a problem with the old hinge slopping around and not allo... read more

Pice busted off of door striker.

  • Customer: Terrance from Three Lakes, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 31 of 37 people found this instruction helpful
I just removed the 2 screws, removed the old striker and replaced it with the new one. The entire project took 3 minutes. read more