Models > F86D-1

F86D-1 Maytag Range - Overview

Sections of the F86D-1

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(42)
PartSelect #: PS11750107
Manufacturer #: WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookw...
$7.67
  In Stock
Surface Burner Receptacle Kit – Part Number: 12001676
Surface Burner Receptacle Kit
★★★★★
★★★★★
(19)
PartSelect #: PS1570190
Manufacturer #: 12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your...
$13.91
  In Stock
Surface Burner - 8 Inch - 2600W – Part Number: WP660533
Surface Burner - 8 Inch - 2600W
★★★★★
★★★★★
(17)
PartSelect #: PS11743367
Manufacturer #: WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter...
$36.93
  In Stock
Standard Y-Frame Range Surface Burner – Part Number: WP660532
Standard Y-Frame Range Surface Burner
★★★★★
★★★★★
(11)
PartSelect #: PS11743366
Manufacturer #: WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1...
$30.15
  In Stock
Surface Element Switch – Part Number: W10900107
Surface Element Switch
★★★★★
★★★★★
(3)
PartSelect #: PS12070192
Manufacturer #: W10900107
A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a kno...
$52.73
  In Stock
Surface Element Kit – Part Number: 4392061
Surface Element Kit
★★★★★
★★★★★
(1)
PartSelect #: PS373085
Manufacturer #: 4392061
This kit includes two 8" elements, two 6" elements, four receptacles and any remaining hardware needed for installation.
$111.51
  In Stock
KNOB- SURF – Part Number: WP7711P147-60
KNOB- SURF
PartSelect #: PS11744663
Manufacturer #: WP7711P147-60
$24.07
  In Stock
BLOCK- TER – Part Number: 7401P016-60
BLOCK- TER
PartSelect #: PS1653533
Manufacturer #: 7401P016-60
  No Longer Available
DISCONTINUED – Part Number: 7407P012-60
DISCONTINUED
PartSelect #: PS2089659
Manufacturer #: 7407P012-60
  No Longer Available

Questions And Answers for F86D-1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the F86D-1

[Viewing 2 of 2]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Parts Used:
Surface Burner Receptacle Kit
  • Richard from Carthage, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
191 of 208 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1 had 2 large burners not working at all, and was cooking everything on the 2 smaller burners
It was so simple to repair - all I had to do was slide the older burners out and slide the new ones in - it took less than 10 min to complete the whole job! No tools used at all.
Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Mary from Lebanon, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original burners were not working correctly.
I received my ordered in less than a week. It was great. The day I got them I remove the old burners and replaced them with the new ones. It took me about 3 minutes total. I was then able to cook my Christmas dinner with out any problems.
Parts Used:
Surface Burner - 8 Inch - 2600W Standard Y-Frame Range Surface Burner
  • Sharon from Phoenix, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!