Quick Question!

Have you ever purchased from PartSelect.com before?

Models > F7608W0

F7608W0 Roper Range - Overview

Get Parts and Repair Help for F7608W0

If you know the range repair part you need, you can browse the list of all parts on the F7608W0, or you can search by name or part description. You can also find your part by where it is located on the F7608W0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for F7608W0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$12.91

Chrome Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with many electric ranges and cooktops.

Order within the next 4 hrs and your part ships today!
$10.81

PAN,COMBINATION 6" CHROME

Sold individually. This part is located beneath the element and catches any spills.

Order within the next 4 hrs and your part ships today!
$7.16

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

Order within the next 4 hrs and your part ships today!
$28.84

Delta Frame Surface Unit - 6"

This 6 inch surface burner with reinforced delta frame carries 1250 watts and 240 volts. It has four turns and is compatible with many electric ranges. Its center medallion is all black in color.

Order within the next 4 hrs and your part ships today!
$35.55

Burner Switch Kit

This push-to-start Robertshaw style replacement for load rated switches has a clockwise rotation. It also has a break off shaft, and comes with plastic adapters.

Order within the next 4 hrs and your part ships today!
$49.75

Delta Frame Surface Unit - 8"

This electric range delta frame surface element with looped terminal ends measures eight inches and has five turns. It carries 2600 watts the center medallion is black in color.

Order within the next 4 hrs and your part ships today!
$66.28

Bake Element

This element has push-on terminals.

Order within the next 4 hrs and your part ships today!
$21.64

SWTCH-LITE

Order within the next 4 hrs and your part ships today!

SENSOR

xInsulation Retainer-Lower

Common Symptoms of the F7608W0

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner would not heat

  • Customer: Edward from Malvern, AR
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 22 of 29 people found this instruction helpful
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got ... read more

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

The switch had shorted

  • Customer: Stephen from COlleyville, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 8 of 11 people found this instruction helpful
I reviewed the schematic. Removed the outer casing. Pulled out the existing wires and replaced them exactly on the new switch. Snipped out off the control stem to match the others. There was a small metal piece on the old stem which holds on the knob. I removed it from the old stem and put it on the new stem and Eureka. read more