Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EWDW6505GW0B

EWDW6505GW0B Electrolux Dishwasher - Overview

Get Parts and Repair Help for EWDW6505GW0B

If you know the dishwasher repair part you need, you can browse the list of all parts on the EWDW6505GW0B, or you can search by name or part description. You can also find your part by where it is located on the EWDW6505GW0B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.42

ROLLER ASSEMBLY

The roller assembly is attached to the upper dishrack of your dishwasher. This is what allows you to easily move your dishrack in and out. The wheel may become damaged over time an...

Order within the next 10 hrs and your part ships today!
$29.58

ROLLER ASSEMBLY

This is an OEM dishrack roller assembly that fits on the lower rear of your dishwasher rack. This part is sold individually. Check the opposite lower dishrack assembly before ordering in case it needs to be replaced as well. The rollers attach to your lower dishrack and allow the rack to smoothly roll forward and backward when the dishwasher door is open. Without the rollers, it would be difficult to access the rack to safely fill and empty the appliance with dishes. The front lower roller assembly will have a different part number than this part.

Order within the next 10 hrs and your part ships today!
$33.92

GASKET

This gasket is a seal for your dishwasher and prevents leaking from occurring. The gasket can become worn down over time and you might notice some discoloration. This indicates a r...

Order within the next 10 hrs and your part ships today!
$46.76

Center Spray Arm with Manifold

Spray arms rotate and spray water to clean the dishes inside the dishwasher tub. This part is located beneath the upper rack. The spray arm is meant to spray water and detergent forcefully over the dishes. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. If the spray arm is made of plastic, it can become warped or cracked. If it is a metal spray arm, it can pull open at the seams or get bent. Make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arms and check to ensure they are straight and undamaged. This part includes the manifold. NOTE: Clogged holes are a hint to check if there is a problem with the filter system that resulted in debris coming into the arms.

Order within the next 10 hrs and your part ships today!
$13.91

FENCE

Order within the next 10 hrs and your part ships today!
$2.16

BRACKET

This is a bracket, but it may also be known as a dishrack row clip, or simply a tine clip, and it is used in conjunction with your dishwasher. The purpose of this part is to fasten to the rack and the tine row. This will give the tine the stability it needs to hold your glasses and bowls by firmly attaching to the rack. You will not need any tools to make this repair. This piece is sold individually, measures to be about 2 inches by 1 inch, and is gray in color.

Order within the next 10 hrs and your part ships today!
$15.66

ROLLER ASSEMBLY

Order within the next 10 hrs and your part ships today!
$16.87

FENCE

Order within the next 10 hrs and your part ships today!
$7.69

CLIP

This clip is designed for use in your dishwasher. If you notice that your original clip is damaged, or the dishwasher is not cleaning dishes properly, you may need to replace it. T...

Order within the next 10 hrs and your part ships today!
$25.54

ACTUATOR PAD

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The brackets on the lower rack had worn out and not holding up the tines.

  • Customer: Alan from Gladstone, OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
The parts came in a timely manner and took about 15 minuets to replace with no tools. read more

No water flow

  • Customer: Craig from Yuma, AL
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
  • 0 of 0 people found this instruction helpful
Changed out Motor and Pump also canged out control box but no joy read more

New model did not come with knive tray

  • Customer: Robert from Fort Myers, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the Versa Tray that was a component of the old dishwasher but not of the new replacement machine. The fun part was the ease of finding the part with Part Select, and the fact that it was fifty per cent the cost of the manufacturer's part on the official web site. Installation is simply to place the over rack hooks on the side of the tray in place a... read more