Models > EW3LDF65GBD

EW3LDF65GBD Electrolux Range - Overview

Get Parts and Repair Help for EW3LDF65GBD

If you know the range repair part you need, you can browse the list of all parts on the EW3LDF65GBD, or you can search by name or part description. You can also find your part by where it is located on the EW3LDF65GBD by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EW3LDF65GBD [Viewing 6 of 6]

$8.08

ANTI TIP KIT

$28.21

Oven Probe

$4.23

Steel Washer

Size: 3/4 inch od x 1/4 inch id

$7.09

Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.

$58.36

ELEMENT

$4.65

Leveling Leg

Sold Individually.

$28.36

TERMINAL BLOCK KIT

$5.27

Screw

Sold Individually.

$52.64

Oven Door Latch Motor and Switch

$5.52

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't operated. Error code F9

  • Customer: Richard from Centennial CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 15 of 18 people found this instruction helpful
I called a repair place. They charged $54 to diagnose, (said it needed a new latch motor) then wanted $220 to complete the repair. I checked online prices and did it myself for about 15 minutes work and the latch motor itself ($44?).

Was necessary to uplug the range, pull it away from the wall and remove the back panel sheet metal, then 3 screws ... read more

Broiler element would not work

  • Customer: Frances from Paris TN
  • Difficulty: Really easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 12 of 15 people found this instruction helpful
First my husband cut off the circuit breaker. He then removed the two screws that held the element in place and pulled the element out about 3 inches and disconnected the two wires. The rest was easy. We were impressed at how fast the element was sent. We were told about 5 days to 7 days. The element arrived on the second day. Very please with the servi... read more

anti-tip bracket not installed

  • Customer: Brian from Panama City Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
I was selling my home and did not realize that the anti-tip bracket was not originally installed. A home inspection caught the problem and the buyers required that I install one. I could not find the original and obviously the installer never put it in place to begin with. The buyers wanted this resolved within a week so I had to act fast. I could not fi... read more