Models > EVM1750DM2BB

EVM1750DM2BB General Electric Microwave - Overview

Get Parts and Repair Help for EVM1750DM2BB

If you know the microwave repair part you need, you can browse the list of all parts on the EVM1750DM2BB, or you can search by name or part description. You can also find your part by where it is located on the EVM1750DM2BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EVM1750DM2BB [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.98

Light Bulb - 40W 130V

Sold individually.

$11.54

Light Socket - 250V 75W

$5.34

Turntable Coupler

$63.64

Cooking Tray

This part actually measures 12.5" in diameter and may be smaller than the original tray. This tray is rotated when the microwave is turned on.

$8.54

Glass Light Lens

$44.62

Drive Motor

This motor rotates the glass turntable in the microwave and accepts a D-shaped shaft.

$19.43

Secondary Door Switch

$42.29

Grease Filter

This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.

$26.27

Charcoal Filter

This vent hood filter collects grease particles in the air from cooking. Sold individually.

$4.27

Flat Cab Mounting Bolt

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

turne table ot moving. Filter never changed

  • Customer: Jean-Christophe from Salisbury MA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 369 of 373 people found this instruction helpful
I had no idea what to expect. I was tired to see this turn table not moving. I removed the 7 screws at the bottom of the microwave that I thought was hiding the turn table mechanism. Bingo! I removed the 2 screws holding the motor and check if the power was coming to the motor and it was. The motor was cooked.
I decided to change the filter since I... read more

plate broke

  • Customer: craig from lindenhurst NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 363 of 364 people found this instruction helpful
replaced the plate read more

The turntable motor went out and was making a horrible sound when I started the microwave

  • Customer: Kim from Centerville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 141 of 207 people found this instruction helpful
First I unplugged the microwave. :) Then, I removed the 6 screws found underneath the microwave, which allowed the bottom piece to hang down so I could see the turntable motor. I took the two screws out holding the motor in place and pulled the electric connectors off the motor terminals. Then I got the new part from PartSelect.com, replaced the electrical c... read more