Models > EV250NXRQ03

EV250NXRQ03 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV250NXRQ03

If you know the freezer repair part you need, you can browse the list of all parts on the EV250NXRQ03, or you can search by name or part description. You can also find your part by where it is located on the EV250NXRQ03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV250NXRQ03 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$8.37

Light Rocker Switch

$5.54

Touch-Up Paint - White

$2.70

SCREW

Sold individually.

$3.96

Freezer Door Key

$8.17

Spray Paint - 12 oz. - White

$76.32

Evaporator Fan Motor

This evaporator fan motor circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$2.70

Cabinet Mount Screw

Sold Individually - 2 screws needed to mount each handle.

$3.83

BLADE-FAN

$129.30

GASKET-DOR

Common Symptoms of the EV250NXRQ03 [Viewing 1 of 368]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 34 of 41 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 23 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more

Frozen items on top of freezer not quite frozen, bottom of freezer ok. Freezer alarm sounding.

  • Customer: Randall from Burlington WI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 14 of 20 people found this instruction helpful
Disconnect power / Remove shelves / remove sheet metal panel in rear of freezer / disconnect fan wires / remove fan unit using nut driver. / reassemble. read more