Models > EV181NZRQ05

EV181NZRQ05 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV181NZRQ05

If you know the freezer repair part you need, you can browse the list of all parts on the EV181NZRQ05, or you can search by name or part description. You can also find your part by where it is located on the EV181NZRQ05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV181NZRQ05 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$2.70

Screw

This screw is sold individually.

$8.59

Light Rocker Switch

This light switch is triggered by the door opening and closing.

$5.05

Touch-Up Paint - White

18ml

$2.70

SCREW

Sold individually.

$7.54

Spray Paint - 12 oz. - White

$6.77

Touch-up Paint - Black

16ml

$75.16

Evaporator Fan Motor

This evaporator fan motor circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$2.70

Cabinet Mount Screw

Sold Individually - 2 screws needed to mount each handle.

$52.90

Defrost Timer

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 46 of 56 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Compressor "grounded" and quit running

  • Customer: Mike from Baytown TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Wrench(Adjustable)
  • 43 of 90 people found this instruction helpful
Replaced the compressor with the new one I purchased from you. Installed new parts and recharged unit. The refrigerator / freezer is working better than new. Thanks for the great deal on the compressor. It was here in 3 days. All the parts fit exactly and had no difficulty in the installation or startup. The directions for the wiring were a great help ... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 16 of 19 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more