Models > EV180NZBQ00

EV180NZBQ00 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV180NZBQ00

If you know the freezer repair part you need, you can browse the list of all parts on the EV180NZBQ00, or you can search by name or part description. You can also find your part by where it is located on the EV180NZBQ00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV180NZBQ00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

Sold individually.

$7.87

Light Rocker Switch

$5.25

Touch-Up Paint - White

$2.70

SCREW

Sold individually.

$23.36

Fan Blade

Used with Evaporator Fan Motors.

$5.69

Touch-Up Paint - 1/2oz. - Biscuit

$23.36

Light Socket Kit

The bulb is sold separately.

$7.72

Spray Paint - 12 oz. - White

$48.71

Door Handle

White in color. Screws sold separately.

$27.08

Adhesive Cement

Also known as Alumilastic Cement.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 38 of 46 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 21 of 25 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more

Compressor "grounded" and quit running

  • Customer: Mike from Baytown TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers, Wrench(Adjustable)
  • 35 of 76 people found this instruction helpful
Replaced the compressor with the new one I purchased from you. Installed new parts and recharged unit. The refrigerator / freezer is working better than new. Thanks for the great deal on the compressor. It was here in 3 days. All the parts fit exactly and had no difficulty in the installation or startup. The directions for the wiring were a great help ... read more