Models > EV15HKXKW1

EV15HKXKW1 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV15HKXKW1

If you know the freezer repair part you need, you can browse the list of all parts on the EV15HKXKW1, or you can search by name or part description. You can also find your part by where it is located on the EV15HKXKW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV15HKXKW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EV15HKXKW1 [Viewing 5 of 5]

$2.52

Light Bulb - 40W

Sold individually.

$17.62

Defrost Timer Kit

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.

$3.76

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$5.54

Touch-Up Paint - White

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$51.08

Evaporator Fan Motor Kit

This refrigerator evaporator fan motor kit comes with a wiring harness and a four-inch push on fan blade.

$24.55

Light Socket Kit

The bulb is sold separately.

$8.17

Spray Paint - 12 oz. - White

$62.13

Door Handle Kit of 2 - Black

Almond handle no longer available. NOTE: As per the manufacture the handle may have to be cut to fit.

$2.70

Screw

This screw is sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken elbow on icemaker water fill tube.

  • Customer: Charles from Orland Hills IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 66 of 73 people found this instruction helpful
Removed 2 screws holding water fill tube to rear of refrigerator and pulled out, matched old part with new to make sure of proper match. Guide new fill tube thru hole, making sure it is aligned with slot in ice cube tray on inside of freezer. Install new plastic line from water pump outlet to water fill tube, check for leaks, job done. read more

Freezer Iced up, dripping water into refrigerator below

  • Customer: Robert from Bradenton FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 41 people found this instruction helpful
De-iced the refrigerator. Removed two screws from the thermostat panel on the upper refrigerator section. Tilted it down, removed two speed nuts holding the timer, unplugged the timer plug. Determined from the instruction sheet (easy to follow) what time delay function is used, based on wire colors, placed the jumper on the correct terminal on the new tim... read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 23 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more